Order No. 3080/00
Queen is a semi-scale wooden boat from the 1960?s. During this period sports boats were still built from durable mahogany timber - as is our Queen.
We have again adopted the proven hull design of our two models Classic Sportboat and Diva, but with increased size and a new superstructure. The side panels of this model?s superstructure are glued permanently to the hull in order to provide effective protection from spray. Access to the interior is gained by raising the cabin roof and lifting out the cockpit as a complete shell from the rear part of the hull.
This model is an all-wood kit based on a hard-chine hull, which is a basic requirement for fast, straightforward building. All the wooden parts are highly pre-fabricated, and are ready to be glued in place after a quick check for fit. The basic method of assembly is the same as that of the Classic Sportboat and Diva: the hull is built over a die-cut Depron sheet jig into which the bulkheads are inserted. Fitting the keel and the two fore-and-aft bearers completes the basic bulkhead framework.
The ideal power plants for the model are the Race / Speed 600 - 700 series of electric motors.
The model kit contains all the wooden parts required to build the model, together with fittings and propeller shaft.
|Overall length||ca. 950 mm|
|Beam||ca. 315 mm|
Suitable power system
|E-Motor:||Race 650||Order no. 7124/18|
|Battery:||7 cells NiMH or 3s Lipo|
|Speed controller||Multi 25||Order no. 7019/71|
|3-blade-propeller||40 mm / M4||Order no. 7166/06|
|E-Motor:||actro c5||Order no. 7002/35|
|Battery:||10 cells NiMH or 4s Lipo|
|Speed controller||actronic 45bec||Order no. 7002/51|
|3-blade-propeller||50 mm / M4||Order no. 7166/12|